Our Residential Series mowers up the ante in every way. We make it clear that you should always demand better performance, longer-lasting durability and the most innovative features from your lawn care equipment. Take a closer look at the Avenue, Boulevard and XLT mowers today.
Your Residential Series Lineup
The Country Clipper Residential Series consists of the Avenue, the Boulevard and the XLT.
Residential
Starting at $4,899 MSRP
Avenue
Engines : Kawasaki FR600V, Kawasaki FR651V
Cutting Widths : 42", 54"
Residential
Starting at $5,999 MSRP
Boulevard
Engines : Kawasaki FR691V
Cutting Widths : 48", 54", 60"
Residential
Starting at $7,999 MSRP
XLT
Engines : Kawasaki FR730V
Cutting Widths : 48", 52", 60"
Compare Residential Specs
Take a closer look at the different specs of our Residential Series mowers to determine which model meets your needs best. Joystick available on all series, Twin-Lever Steering Options Available on Boulevard and XLT series.
| Avenue | Boulevard | XLT | |
|---|---|---|---|
| Type: |
Kawasaki FR600V, Kawasaki FR651V |
Kawasaki FR691V |
Kawasaki FR730V |
| Horsepower: |
18, 21.5 |
23 | 24 |
| Cylinders | 2 | 2 | 2 |
| Oil Capacity |
1.8 qt (1.7 L), 2 qt. (1.9 L) |
2.0 qt (1.9L) |
2.1 qt (2.0 L) |
| Drive System |
Hydro-Gear® EZT |
Hydro-Gear® ZT-2800 |
Hydro-Gear® ZT3100 |
| Fuel Capacity |
5 Gallon |
5 Gallon |
5 Gallon |
| Steering Control | Joystick | Joystick, Twin Lever |
Joystick, Twin Lever |
| Stand-Up Deck |
Standard |
Standard | Standard |
| Tires, Rear |
18×8.5-8, 18×9.5-8 |
20×10-10, 20×12-10 |
22×11-10, 22×9.5-10 |
| Tires, Front |
13×5-6 |
13×6.5-6 |
13×6.5-6 |
| Turning Radius |
Zero-Turn |
Zero-Turn |
Zero-Turn |
| Ground Speed(Forward/Reverse) |
7 mph/3.75 mph |
7.5 mph/4 mph |
8 mph/4 mph |
| Length |
79″ |
79″ |
79″ |
| Height: Top of Seat Back |
45″ |
– |
48″ |
| Width, Tractor(Outside Rear Tires) |
43″, 45″ |
47″, 49″ |
47″, 49″ |
| Width, Deck W/Chute |
54″, 67″ |
58″, 67″, 74″ | 61″, 65″, 73″ |
| Width, Deck Chute Up |
43″, 55″ |
50″, 55″, 62″ |
49″, 53″, 61″ |
| Cutting Width |
42″, 54″ |
48″, 54″, 60″ |
48″, 52″, 60″ |
| Cutting Height |
1.5″ – 4.5″ (1/4″ increments) |
1.5″ – 4.5″ (1/4″ increments) |
1.5″ – 5″ (1/4″ increments) |
| Deck Construction |
Welded 12 Gauge Steel Deck with 12 Gauge Reinforcement |
Welded 12 Gauge Steel Deck with 12 Gauge Strategic Reinforcements |
Welded 12 Gauge Steel Deck with 10 Gauge Strategic Reinforcements, including high-impact anti-scalp rollers, 3/8″ x 2″ wear bar on leading & trim edge |
| Blade Length |
18.375″ (3 per deck), 21″ (2 per deck) |
17″, 18.375″, 21″ |
17″, 18.375″, 21″ |
| Spindle Assembly |
Cast aluminum housing; 1″ diameter shaft; maintenance free |
Cast aluminum housing; 1″ diameter shaft; maintenance free |
Cast aluminum housing; 1″ diameter shaft; maintenance free |
| Blade Tip Speed, Approx |
18,000 fpm |
18,000 fpm |
18,000 fpm |
| Weight |
587 lbs, 639 lbs |
692 lbs, 704 lbs, 726 lbs |
823 lbs, 833 lbs, 838 lbs, 843 lbs, 848 lbs |
| Seat |
Enhanced Comfort Molded Seat with Sewn Cover |
Adjustable, High Back, Deluxe Bucket Seat |
High Back, Enhanced Comfort Seat with adjustable slides |
| Other Standard Features |
Arm Rest, Cup Holder, Electric Start, Hitch Plate |
Arm Rest, Cup Holder, Electric Start, Hitch Plate, Hour Meter |
Arm Rest, Cup Holder, Electric Start, Front Step, Hitch Plate, Hour Meter |
| Deck Engagement | – |
Electric Clutch, Warner |
Electric, Ogura® |
| ContourDTS™ Equipped | – | – | Standard |
| Pivoting Front Axle | – | – | Standard |
